Why convert horizontal video to vertical?
TikTok, Instagram Reels and YouTube Shorts play full screen on a phone held upright. Post a 16:9 video unchanged and it shows up as a thin band with black bars above and below. The speaker's face covers a tiny part of the screen, and viewers scroll past faster.
There is also a platform reason. YouTube classifies square or vertical videos of up to three minutes as Shorts, according to YouTube's official help page. A good vertical version lets you reuse an interview, a webinar or any landscape shoot on every short-form platform.
Step by step
- Check the source
Look at the resolution: a 4K source stays sharp after cropping, a 1080p source loses a little detail.
- Pick a method
Subject tracking for one speaker, split screen for two people, blurred background for wide shots or screen recordings.
- Reframe
Create a 9:16 project (1080×1920) and apply automatic reframing, or position the crop by hand.
- Review tricky moments
Scrub through and fix any shot where the frame cuts off a face, a hand or a product.
- Add text and captions
Keep captions and titles out of the interface zones, roughly the top 14% and bottom 35%.
- Export at 1080×1920
Export native vertical with no black bars, then post to TikTok, Reels or Shorts.
| Ratio | Size | Main use |
|---|---|---|
| 9:16 | 1080×1920 | TikTok, Reels, Shorts, Stories |
| 4:5 | 1080×1350 | Instagram and Facebook feed posts |
| 1:1 | 1080×1080 | Square feed posts, ads, LinkedIn |
| 16:9 | 1920×1080 | Regular YouTube, websites, presentations |
| 16:9 in 4K | 3840×2160 | Source footage to reframe to vertical later |
The crop math: what you lose going from 16:9 to 9:16
One calculation explains most disappointing results. In a 1920×1080 frame, a 9:16 strip that keeps the full height is 1080 × 9 ÷ 16 = 607 pixels wide. You keep only 32% of the original width.
- 1080p source: the 607×1080 strip must be scaled up about 1.78 times to fill a 1080×1920 screen. Hair, small text and fine detail get noticeably softer.
- 4K source (3840×2160): the strip is 1215×2160, larger than the 1080×1920 you need. No upscaling, the image stays sharp, and you even have room for a small zoom.
- Shot vertically: nothing to crop. If you already know the clip is for TikTok, this is the best option.
Rule of thumb: if one shoot has to serve both landscape and vertical, record in 4K. If all you have is 1080p, accept a slight loss of sharpness or use one of the no-crop methods below.
Four ways to make a video vertical
1. Fixed center crop
The editor cuts the same strip from the middle of every frame. It is fast and fine when the speaker sits still in the center of a tight shot. As soon as the person moves, or there are two people, faces slide out of frame.
2. Subject tracking (auto reframe)
Face or person detection finds the subject in each frame and moves a virtual camera to keep them centered. The movement must be smoothed, or the frame jitters with every nod. This is the right method for interviews, video podcasts and anyone who moves while talking.
3. Full frame on a blurred background
The whole 16:9 image sits in the middle, and the top and bottom are filled with an enlarged, blurred copy of the same video or a solid color. Nothing is cut, which suits landscapes, screen recordings and wide shots. The subject is small, though, so use it for short shots rather than a whole talking-head video.
4. Split screen
For two people far apart in one shot, stack two 1080×960 frames, one on top of the other. Each face stays large and readable, with no back-and-forth camera movement.
Where to place the subject and text in a 9:16 frame
On TikTok, Instagram and YouTube, the app interface covers part of the video: account name and caption at the bottom, like and share buttons on the right, tabs at the top. A safe rule, taken from Meta's ad guidance for Reels, is to keep roughly the top 14%, the bottom 35% and 6% on each side free of important content. On a 1080×1920 canvas that is about 270 px at the top, 670 px at the bottom and 65 px per side.
- Eyes: place them around the upper third, roughly 600 to 700 px from the top. Not against the edge, not in the middle of the screen.
- Captions: just above the bottom zone, usually between 55% and 65% of the height. Two to four words per line stay readable on a 1080 px wide frame.
- Right edge: keep logos, prices and key words away from it, the button column hides them.
Shoot with the vertical crop in mind
The best reframe starts on set. A few habits make a big difference:
- Keep the speaker near the center of the landscape frame, with some headroom.
- With two people, seat them closer together or give each their own camera. A wide shot with guests at opposite ends of a table is very hard to reframe.
- Do not burn text into the landscape version (titles, lower thirds on the left). It will be cut off in vertical. Add text after reframing.
- Turn on the camera grid and picture the center strip: everything that matters has to fit inside it.
- When you can, shoot 4K at 25 or 30 fps so the crop stays sharp.
Common mistakes
- A jittery virtual camera: if the frame follows every head movement, viewers feel seasick. Good tracking reacts with a slight delay and glides.
- Cutting off the chin or forehead: an overly tight crop squashes the face. Leave space above the head.
- Forgetting hands and products: in a product demo, the frame should follow the object, not only the face. Check those moments and fix them by hand.
- Keeping black bars: a 16:9 video dropped into a vertical frame looks careless. Use at least the blurred background.
- Exporting the wrong size: a reframed edit exported as 1920×1080 with bars is still horizontal to the platform. Export at 1080×1920.
Converting to 9:16 with Orbicut
Orbicut is an automatic video editing app for iPhone, iPad, Android, Mac and the web. Its reframing follows the subject: it detects the face or person speaking and moves a smoothed virtual camera to keep them centered when going from 16:9 to 9:16. You can then export the same edit in 9:16, 1:1, 4:5 or 16:9, and add animated captions placed above the interface zone. To try it without installing anything, open the online demo.
For long landscape recordings, remove the silences first so the reframe runs on a tighter cut.
Frequently asked questions
Can you convert 16:9 to 9:16 without losing quality?
Yes, if the source is 4K: the vertical strip is 1215×2160 pixels, more than the 1080×1920 you need. From a 1080p source the image is scaled up about 1.78 times and gets slightly softer.
What size is a 9:16 video?
The standard 9:16 video size is 1080 pixels wide by 1920 pixels tall. Higher resolutions exist, but 1080×1920 is the usual target for TikTok, Instagram Reels and YouTube Shorts.
How do I make a two-person interview vertical?
Split screen is the most readable option: each person gets half the frame (1080×960), one above the other. Alternatively, smoothed auto reframing can switch to whoever is speaking.
Should I just shoot vertically?
If the video is only for short-form platforms, yes, shooting vertically avoids any loss. If you also need a landscape version, shoot 4K horizontal with the subject centered and crop afterwards.
Does Orbicut reframe to 9:16 automatically?
Yes. Orbicut detects the face or person speaking, keeps them centered with a smoothed virtual camera and exports in 9:16, 1:1, 4:5 or 16:9.